MediCollector would like to congratulate the team of researchers from the University of Canterbury in New Zealand and Monash University in Malaysia for their paper at the International Federation of Automatic Control's 10th IFAC Symposium on Biological and Medical Systems BMS 2018. This team used MediCollector to gather data for their study of lung mechanics in preemies. We wish them continued success in their work! The full text of their publication is available using the link below.
Tae Kim, Kyeong & Howe, Sarah & Chiew, Yeong Shiong & Knopp, Jennifer & Chase, James. (2018). Lung Mechanics in Premature infants: Modelling and clinical validation. IFAC-PapersOnLine. 51. 225-230. https://doi.org/10.1016/j.ifacol.2018.11.638.
A research team from the Wake Forest University School of Medicine in Winston-Salem NC recently published a manuscript in the Journal of NeuroInterventional Surgery detailing their successful research studying venous sinus waveform morphology. This team used the MediCollector BEDSIDE software for data collection of venous manometry data. For more details about their successful study and how MediCollector was used, you can access their publication here:
West JL, Garner RM, Greeneway GP, et al. Venous waveform morphological changes associated with treatment of symptomatic venous sinus stenosis. Journal of NeuroInterventional Surgery Published Online First: 21 March 2018. doi: 10.1136/neurintsurg-2018-013858
ADInstruments is a company that provides a large suite of products, such as LabChart, for data acquisition, visualization and analysis... but they can't acquire data from your bedside patient monitors.
MediCollector's products are focused primarily on data acquisition... not analysis. So to analyze your data, you will need 3rd party tools like LabChart. I can think of one easy way to get your bedside data into LabChart: Use MediCollector to record the data. Then when finished recording, export the data to an EDF or EDF+ file and open it inside LabChart. I just tested this using the free version of LabChart (LabChart Reader) and it works great!
MediCollector does stream live data out to 3rd party applications. But even though Labchart has a bunch of "device enablers" and other add-ons, I don't know of any way to get LabChart to unpack and receive that data in real-time. So your best bet is to use MediCollector for recording, and then export to EDF for use in LabChart.
The MediCollector software applications were built because the interfaces to medical devices are waaaaay to complex. We want to make it easy for you to access the data that is generated in these devices. And now we have a new way to make this data available to you!
Our customers can now stream live data out to third party applications in real-time. This is done by outputting the data to a TCP/IP port using a very simple protocol. This allows customers to receive and process data or execute algorithms in real-time in external applications like Matlab or C++.
For more information, please read our application note on streaming live data from medical devices. This streaming functionality is already available in the latest version of MediCollector BEDSIDE and MediCollector SERVICE. And we even provide you with very simple examples that shows you how to access the data stream using Matlab or LabVIEW.
And as always, please don't hesitate to contact us. We are experts in data acquisition and can help you.
Acquire data from GE patient monitors ... such as Datex-Ohmeda, S/5, AS/3, ProCare, Carescape, Cardiocap, etc
Good news! In response to customer demand, I am proud to announce that MediCollector can now support a wide range of GE patient monitors, including:
Using MediCollector software and cables, you can now connect to these GE devices and download, stream and record data (including both waveforms and numerics) from all of these GE devices.
With the release of our latest products, there are now numerous ways to embed MediCollector into your own applications. For more information, please our new page about adding data-acquisition into your own products.
This post if for advanced users who want to access data contained in MediCollector datafiles directly.
Normally, to access the data in a MediCollector datafile, you would use the MediCollector software to export the data it into a standard file format like a tab-delimited CSV file or an EDF file. This is done from within MediCollector by choosing FILE>EXPORT from the menu. The resulting file can then be imported into other applications like Excel, Matlab, SAS, R, etc.
But with a little programming effort, you can actually skip the export step and access the data directly in the .medi datafile.
Before continuing, I highly suggest you read through our FAQ, because it contains a lot of useful information about datafiles etc. Below, I will provide more details for our advanced users:
Please be aware that this is for advanced users only. For the majority of users, we recommend simply choosing FILE>EXPORT to get your data into 3rd party application. But if you are a good programmer, please continue reading.
What is the .medi file format?
MediCollector stored data in files that have a ".medi" file extension. These files are stored using a compressed binary format called TDMS. This format is an open standard maintained by National Instruments.
How do I directly access data in .medi files?
If desired, you can use third-party tools and programming languages to access data in .medi files directly. And you can even install plugins into programs like Excel to load .medi files directly. Below are various resources to help you get started with this.
Do you have any Matlab examples?
Yes! Please download our example Matlab code for loading and plotting data directly from .medi files. This zip file contains instructions, an example Matlab script, and some required 3rd party components to make it all work. This code is provided without technical support. So you are on your own! If you aren't a skilled a Matlab programmer, we suggest you just EXPORT your data into a TXT or EDF file and then import it into Matlab.
Did you ever wish that MediCollector products could collect data from multiple devices simultaneously?
Even though this is not an out-of-the-box option with MediCollector, below I describe some simple ways to solve this problem.
MediCollector BEDSIDE is a software product for retrieving and recording data from patient monitors and medical devices. But currently, it only allows one-to-one connections. So you would typically install MediCollector on one computer, and record data from one device. But we have some solutions for those who want to record from multiple devices:
Welcome to our blog! This is the first post in the MediCollector Blog. This blog was created to provide support and advice to MediCollector customers. We'll post here about once a week with news, information and expert opinions on topics such as:
We look forward to hearing from you! Use the comments below to tell us what you think!
This blog provides all the latest news and updates related to MediCollector.
Founder of MediCollector